Threshold Settings

 

Threshold tab

• Enable or disable threshold settings for the throughput and latency tests.

  • When enabled, threshold settings can be configured for all of the test frames selected in the frame settings tab.

 

• A Pass/Fail criteria will be applied when the threshold settings are enabled. Select a rate type from the drop-down menu that will be used to determine pass/fail criteria. Options are % of Max Rate, % of Line Rate, Utlized Line Rate (Mbps).

  • For example, if the throughput threshold value for a 64 byte frame is configured for 80%, then a Pass criteria is assigned if the throughput rate is 80% or better.

  • The threshold values for Throughput and Latency can be customized per user requirements. Tap on the selected value to edit.

 

RFC 2544 Setup - Threshold Settings