Alarm Injection Settings

 

Alarm injection can be performed during testing. The type of alarms and alarm injection are configured in the Setup Injection tab. Once the test is running, alarm injection can be performed by pressing the Alarm Inj. button on the right side of the screen.

 

• Layer: Select from Ethernet or PCS

• Ethernet

  • Type: Local Fault, Remote Fault, Optical LOS. Four optical LOS lanes are available for selection.

• Alarm Flow: The alarm flow determines how the selected alarms will be injected. Single burst or continuous can be selected.

• Duration: Duration for single burst flow; 1s, 10s, or 100s.